|
|
The requirements is only for general guidance. You need NOT install any of the files below if you can rip your DVD without any errors.
1. You may want to install Adaptec ASPI driver. It is not required to install the ASPI driver but if you do, the ripping speed will increase.
To install Adaptec ASPI driver, go to the windows Start Menu and open DVD Ripper Plus folder. Click Install ASPI Driver 4.7 and follow the instructions.
You can also download this driver from www.adaptec.com website.
2. It is recommended that you rip your DVD on a PC with a Pentium Processor, preferably with CPU speed not lower than 800MHz. The faster your CPU the faster the ripping speed.
3. It is recommended that you install video codec on your PC. Windows will require these codec to be able to recognize specific video file formats. Without these codec installed, the program may not be able to convert to a specific video file format, such as AVI. We recommend that you use K-Lite Codec Pack - this is the one we are using for our daily video processing works. Download the latest version from the link below:
http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm
If you need the orginal AVI (DivX, XViD and others) video codec, you can visit their website at http://www.divx.com to download their original AVI video codec.
|
| $26.00 Immediate Delivery |
2.01 MB |
 |
 |
|
|
|
|
|
7 (39%)
11 (61%)
How to use Rip and Unprotect to backup DVD
Introduction
