iSofter DVD Audio Ripper Deluxe 3.0.2007.205 Online Manual
iSofter DVD Audio Ripper Deluxe
22 (50%) 
22 (50%)Tips: Convert Microsoft Excel to HTML | PDF to HTML | Convert paper documents to PDF / HTML
Getting Started
- Using DVD Audio Ripper Deluxe
- Support & FAQs
- Register & CopyRight
Input Settings |
Various types of Input settings are available
in iSofter DVD Audio Ripper Deluxe. The following table provides an overview
of the tasks you can complete using settings.
| Function | Description |
|
ASPI |
Frame
rate of the output video file. 25 (PAL) or 23.97,29.97 (NTSC). Warning: this value is not automatically set, if you choose a different frame rate from the input, a pull down will be performed. Avoid conversion between NTSC and PAL. Default is : 25 |
| DeMacroVision: | Remove
macro vision protection from the movie. Default is : Yes |
| Dolby Surround: | Enable
Dolby Surround downmix. Allow to preserve better 5.1 FX in stereo mode Default is: Enabled |
| Deinterlace Filter: | Use
this when your image is interlaced (when 1 line / 2 is shifted) Warning: if you set odd or even field you cannot be sure that it is the good field, Just make a clip of 10 images to see if you're right. Interpolate mode interpolate the even field (you lose a bit quality for SVCD but it always works) Default is : None |
| Key
Search: |
Mode
for CSS key search (the mode 0 works fine in 99% of cases). 0 - Search a key one time when starting 1 - Search a new key at each VOB-ID 2 - Search a new key at each CELL-ID 3 - Search a new key at each VOB/CELL-ID combination 4 - Disabled Default is : 0 |
| CPU Type |
CPU calculation mode. 0 : MMX (works only on Intel MMX processors) 1 : 3DNow (for amd user) 2 : SSE2 for IntelP4 processor 3 : Normal (slow) don't perform MMX calcul Default is : MMX |
| Name Rule: | use
<title>, <chapter>, <artist>, <album>, <year>,
<genre>, <volume> to create an unique filename for each file,
You can also use backslash() to create folders. Default is : <title>-<chapter>-<volume> |
| Procress Priority: | The
program procress priority in system. Default is : High |
| Detect 24 FPS: | Detect
automatically 24Hz progressive NTSC. Default is : Yes |
| Force
24 FPS: |
Force
input to be a 24Hz progressive NTSC. This flag works only if detect 24fps is checked. (Use it if you think that the 24Hz detection doesn't work). Default is : No |
| Audio
Video synchronization: |
synchronise
the audio & video on dvd Default is : Yes |
| Shut Down: | check
the box the program will shutdown the computer after job done |
| Overwrite
file: |
overwrite
the exsit file without asking Default is : No |
| Volume: |
Gain
of the audio output. No normalization is performed. A value of 1 can't generate distortion (cracking) but the output sound may be very low. The default gives a good volume for most DVDs. Make few clip of the movie where you know the volume is high and adjust this value in order to get a good volume. You can also use the sound normalizer to find an optimum volume. Default is : 3 |
Tip
- By using default setting, you can quickly accomplish many common tasks.