ImTOO MPEG Encoder 5.1.24.0414 Online Manual
Video file converter to convert among videos
53 (56%) 
41 (44%)Tips: Convert Microsoft Excel to HTML | PDF to HTML | Convert paper documents to PDF / HTML
ImTOO MPEG Encoder Help
Introduction to ImTOO MPEG Encoder
- Installing ImTOO MPEG Encoder
- Getting Started
- Operating Instructions
- Using Wizard Mode
- Advanced Operational
- Setting Profile
- Technical Support
- Buying ImTOO MEPG Encoder
- Annex
 Using Wizard Mode |
|
Welcome Load Source File Set Encoding Time Select Profile Saving Your File Job Summary Encoding Encoding Finish |
Welcome Please click the  button to step into “Load Source File” window; click the  button to terminate the wizard.In the navigation bar on the left, the current step will be highlighted as “Welcome”. Besides, “Welcome” Window also reminds you of the registration of the software. If not, please click the  button to finish the registration in the “Registration” dialogue box. After a successful registration, it will return to the “Welcome” window. |
Load Source File Click the  button to select the file you wish to convert in a pop-up dialogue box. Besides, you can directly input a complete file path in the editing box.  Then, the audio/video parameters of the loaded file will be shown in the “Source Parameters” box. Please click the button to step into the “Set Encoding Time” window.Tip: If the file loaded is not supported by the software, it will not step into the “Set Encoding Time” window. |
Set Encoding Time Drag the slider on the track bar to get the starting and ending points of the clip you wish to convert. To do this, Drag the slider to the point, click the  button or the  button, then the “Start Point” or the “End Point” on the right will be created automatically. Besides, you can directly input values in the time editing boxes to set the “Start Point”, the “End Point” and the “Length” as well. Tip: The default “Start Point” is 00:00:00; “Length” is a complete duration of the source file. After these settings, the “Start Point”, the “End Point” and the “Length” will be relevant. Meanwhile click the button to step into the “Select Profile” window. |
Select Profile Click the drop-down button of the “Profile” editing box to select the required “Profile”.  In addition, by clicking the  button, you can adjust the specific parameters for the selected “Profile” as per your requirements in the List, such as the video size, the video bit rate, the audio bit rate, the channel, the sample rate etc.Tip: As default, the “Output Property” list is in a hidden status. After those settings, please click the button to step into the “Saving Your File” window. |
Saving Your File Click the  button to select the destination of output file in the pop-up dialogue box.Moreover, you can also set the name of the output file. When done, click the button to step into the “Job Summary” window. |
Job Summary Check the settings and click the  button to step into the “Encoding” window to start the conversion process.What’s more, it supports more functions and general information of the settings. Edit button Re-edit the settings for the conversion. To do this: Select the file that you wish to re-edit in the video list and click “Edit” button to step back to the “Load Source File” window. Add Button Add more files. To do this: Click “Add” button, the wizard will step back to the “Load Source File” window. Remove Button Delete the selected file from the video list. Clear Button Clear all the files from the video list. When the required file is selected in the video list, the following items will be shown as: Source File Show the source file path of the selected file. Target File Show the destination of the selected file. Output Format Show the parameters of the output. Overwriting Set the way of covering output files, i.e. the way of covering output files in case a file with the same name exists in the folder that saves output files. Tip: Clicking the  button in the “Load Source File”, “Set Encoding Time”, “Select Profile” and “Saving Your File” windows, it will directly step into the “Job Summary” window.In the “Job Summary” window, by clicking the button, you will terminate the wizard, and the previous settings will not be saved. |
Encoding When the conversion is finished, you can see “Completed” in the “Status” column in the video list. |
Encoding Finish Click the  button to start a new conversion, or click
the button to terminate the wizard.Tip: The “Encoding Finish” window supports some other functions and general information. Open Target Folder Button Select the file in the video list and click the “Open Target Folder” button to open the target folder for viewing the output. Encoded job Show the source file path and target file path in bold if the conversion has been successful. |
|
Related Topics Starting Wizard Mode |
button to open “Log” box.