CD to iPod Solution 6.4.2 Online Manual

Rip Segment Dialog

If you need to rip just a portion of one or more track, or to combine one or more tracks, click on "Rip Segment" to bring up the Rip Segment dialog.

The top slider represents the start frame for the segment to rip, and the bottom slider represents the end frame. You can "snap" the sliders to the beginning of the current or next track by clicking directly to the left or to the right of the slider. You can manually enter the start/end frames -- the length of the currently selected segment is shown in (minute:second:frame) format. A frame is 1/75 of a second. It also indicates where the selected segment starts and ends relative to the start of tracks. In the example above, it is set to rip tracks 2 and 3 as one contiguous segment -- the overall length of the segment is 42923 frames, or 9 minutes, 32 seconds and 23 frames (or about 0.31 sec.).