xtelsio TAPI for Asterisk

xtelsio TAPI for Asterisk - create a VoIP-PBX based on PC Hardware Asterisk is open-source software, witch allows you to create a VoIP-PBX based on PC Hardware. With additional special ISDN- or analog-cards you can also use your classic phones.

xtelsio TAPI Driver for Asterisk is a tool that supports basic TAPI functions for your existing TAPI application and this for multiple lines of one or several Asterisk systems.

The TAPI Driver supports dialing and hanging up as well as signalling telephone numbers of incoming and outgoing calls. For snom phones, you can activate a direct control mode - this allows to initiate calls in hands-free mode and to accept incoming calls.

You can initiate calls directly from within Microsoft Outlook, ACT or any other TAPI application.

The TAPI driver can be installed on a Windows Server (also on a Terminal Server) or on every client computer.

Hint: The xtelsio CTI Client already contains a TAPI-Connector for Asterisk. If you use the Client, you don\'t need the real TAPI driver for Asterisk.

Dial a phone number:
If you dial a telephone number via TAPI application, your Asterisk phone device is called first and as soon as you have picked up the receiver the real destination number is dialed.

Limitations: