How to create parody voices with AV Voice Changer Software Diamond?

The Parody Module has 2 main panels: Parody Maker and Parody Mixer

¡¤Parody Maker: Click Parody button (1) to open the Parody Maker panel. This panel will let you add your own voice and make a new Parody Voice.

To use Parody Voice Maker and Mixer, you have to add your own voice into Parody Voice Maker. AV Voice Changer Software will compare your voice and the parody voice automatically and adjust the invisible parameters to make your voice similar with the parody voice.

¡¤Click Rec button (1) to record your voice. Please click it again when you finish to stop recording and save your voice. You can press Play button (1) to listen to your voice again.
Note: You must be sure that all the effects and pitch-timbre changer are disabled when you are recording.

¡¤If you have already had the file of your voice. Click the Browse button (2) and indicate the file.

¡¤Note: Your own voice will decide the quality of the Parody voice, so please try to speak a short conversation in about 30 seconds.It only supports .wav file so if you record your voice by other software, please let it save as .wav file.

After adding your voice, now you can add a Parody voice.

¡¤Click Browse button (1) to add the sound file of new parody voice. You can press Play and Stop button(2) to listen the file again.

¡¤Enter the name of new parody voice in the Parody Name box (3).
Note: 16000Hz 16bit Mono is recommended.

¡¤Type the new group of new parody voice at Parody group box (4). If you want it add to a current group, just type exactly the name of the group again. Finally, press Create button to finish.

¡¤Now the new parody voice and new group will appear in B box. Check the box before the parody voice you want to use. The voice you have chosen will be shown in the box beside.

¡¤Now, click Close button.

Now, go to the Parody Mixer to access the Parody Feature. There are many things you have to know in order to use Parody Mixer correctly.

(1) By looking at this number, you know what percentage your voice is similar to the parody voice.

(2) This box show the name of parody.

(3) This is Parody Cursor. By moving it, you can control the mixing percentage of voices.

(4) Click on this button to choose the parody voice.

(5) Finally, you can save your mixing as a new parody voice for later use by clicking on the Save button. Click the Load button to load a saved parody.

(6) Click the Reset button to move the cursor to the center of the Parody Mixer table. At this position, the mixing percentage of each voice is 25%.

(7) If you don't want to use Parody Feature any more, click On/Off .