Record video images and sound directly to your computer.

Recording video images and sound directly to your computer is called capturing, the analog video and audio signals.

To record video, you need a video source (such as a video tape, camcorder) and a video capture board. For recording sound, you need an sound board (such as Creative Labs Sound Blaster).

To capture video using Video Capturix, the capture board must be compatible with Video for Windows. Your system must have the appropriate Video for Windows drivers installed on it. You need to connect the your video source to your video capture board. See in your hardware manual for the hardware setup and configuration.

To record digital video you need a fast computer and lots of disk storage space. The video resolution, the number of colors, and the frame rate all affect the filesize of the motion video.

If you want to capture a motion video using the best resolution and quality, you will need lots of disk storage space.








1. Select "Movie Capture" . This option will activate movie capture toolbar.

2. You have to set filename and destination, press .

3. If you want to capture video with audio press , the default position is on, to turn off press again. (CTRL-A)

4. If you want to insert other information in your AVI, must be on, if you press you will edit copyright information.

5. Adjust frame rate. This option sets the number of frames captured per second. Decreasing the frame rate reduces the processing time.

NEW!! - If you want to adjust frame rate to 29.97 fps (some NTSC formats) double click on FPS display.

6. Adjust duration of your movie, if you want to stop manualy capture operation, press "No Limit".

7. Choose compression method, press .

8. To begin capture you have three possibilities "AutoStart", "Record" and "Motion"

Autostart - Used to capture after a preset time.

Recording - Start capture immediately.

Motion - Used to start capturing when video image changes.

9. If "Attach other information to AVI file" option is activated.



Capturing a single image

If you want to capture a single image from any video source, first remember that image resolution will be the same of video screen resolution.To increase resolution change Video Format.

Video Capturix ables you to capture a still frame, just clicking one key, if you press F11 you will capture a frame from the actual video source.





To capture a single image use a medium resolution like 384x288 or more because after you can re-scale in a image editor.

1. Select Capture Image, press . To change Video Format, press.

2. If you want to insert data on image just press Insert Data if not just leave it unpressed.

3. If you want to use Autostart option or Motion , press "Autostart" or "Motion"

To capture a image from video source, press , and you will see this window and this toolbar:

Video Capturix 2007

Video Capturix 2007 is a powerful non linear video capture application. It lets you capture movies (in AVI format) from any Video for Windows or Windows Driver Model (Version 2005 or higher) video source. You can also freeze video images and save the image in BMP, JPEG,GIF,JPEG 2000,TIF,PCX,PNG format or copy the image to the Clipboard.