DVD Audio Ripper is an excellent free trial audio converter, which provides abundant advanced setting for veterans, and detailed introduction in help page, Following are advanced input setting. Click here to View Advanced output Setting.
Output frame rate:
Frame rate of the output video file. 25 (PAL) or 23.97, 29.97 (NTSC).
Warning: this value is not automatically set, if you choose a different frame rate from the input, a pull down will be performed. Avoid conversion between NTSC and PAL.
Default is: 25 Detect 24Fps:
Detect automatically 24Hz progressive NTSC.
Default is: Yes Force 24Fps:
Force input to be a 24Hz progressive NTSC.
This flag works only if detect 24fps is checked. (Use it if you think that the 24Hz detection doesn't work).
Default is: No Dolby suround:
Enable dolby suround downmix.
Allow to preserve better 5.1 FX in stereo mode
Default is: Enabled Audio 48 KHz to 44.1 KHz:
48 KHz down sampling mode.
0: Normal mode (fastest)
1: High quality (slower)
2: Export AC3
Export the source AC3 to a file, you can afterward select the output file by clicking on the Select AC3 Output button.
3: 44.1 KHz (no conversion)
Select this when you don't want to make sound conversion when you have a 44.1 KHz source stream.
4: 48.0 KHz (no conversion)
Same purpose as choice 3, when the input frequency is not specified (A3,LPCM) it is usually 48KHz
Default is : 0 Volume:
Gain of the audio output.
No normalization is performed. A value of 1 can't generate distorsion (cracking) but the output sound may be very low. The default gives a good volume for most DVDs.
Make few clip of the movie where you know the volume is high and adjust this value in order to get a good volume. You can also use the sound normalizer to find an otimun volume.
Default is: 3 Save your DVD drive:
Create a temporary buffer to avoid the drive to be switched on/off too much.
If you use a RAM buffer you may disable virtual memory to get more speed. The file will be written in your Windows temporary directory (TMP environment variable).
Default is: Size: 10MB, Location: RAM DeMacroVision:
Remove macro vision protection from the movie.
Default is: Yes Key Search:
Mode for CSS key search (the mode 0 works fine in 99% of cases).
0 - Search a key one time when starting
1 - Search a new key at each VOB-ID
2 - Search a new key at each CELL-ID iDCT:
Inversce Discrete Cosine Transform routines (include also motion compensation)
MMX is fast and suitable for most CPUs. FPU give the best quality.
Default is : Auto detected Overlap:
Go backward of specified amout of time when output volume size has been reached. (This has no effect in custom chapter splitting) i.e. Overlap=10 if the volume end at 1:10:25 next volume will start at 1:10:15.
Default is : 0 sec Audio Video Synchronisation:
Resynchronise video and audio periodicaly. (not always necessary)
Default is : No Deinterlace Filter:
Use this when your image is interlaced (when 1 line / 2 is shifted)
Warning: if you set odd or even field you cannot be sure that it is the good field, Just make a clip of 10 images to see if you're right. Interpolate mode interpolate the even field (you lose a bit quality for SVCD but it always works)
Default is : None |
DVD to AC3